GreenShield Test Results

Testing - Mold

In order to prove GreenShield’s capability, various third party testing has been conducted.

Here is an example of the mold test results. Treated and untreated MDF (Medium Density Fiberboard) boards were exposed to a mold growing environment for 12 months. (treated by dipping in GreenShield solution). Notice no mold growth is seen on the treated MDF board.

Testing - Termite


The field test has shown that GreenShield™ presents a barrier to termite invasion and lessens the tendency for termites to build feeding sites. Termites would move on to other food if they are faced with GreenShield™.

The laboratory test showed that, since there was no other food source present, Formosan termites, the most aggressive species in the world, initially nibbled the treated samples, but did not continue to feed. Also, no significant mortality was observed.

Testing - Rot


The accelerated rot test was conducted on wooden door components with using a variety of wood, including Cedar, Cypress, Mahogany, Fir, and Radiate Pine buried in a soil sprinkled with brown and white rot microbes for 6 months. The treated samples were only sprayed with GreenShield™. The following photos show the test results performed on Mahogany samples.

Testing - Fire

In another simple demonstration, two test wood piles were made, one treated with GreenShield™ and the other untreated. Both were ignited with propane gas tanks. The flame went out right away on the treated one but the untreated one kept buring. (see the video at Test Video )

FOR MORE INFORMATION ABOUT OUR TEST RESULTS, PLEASE CONTACT US AT

info@egreenstone.com

Click here for the sales contact